Comments on: Weird Glue failures and solutions for Garden Art https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/?utm_source=rss&utm_medium=rss&utm_campaign=weird-glue-failures-and-solutions-for-garden-art Creating imaginative & inviting places Wed, 30 Apr 2025 06:26:41 +0000 hourly 1 https://wordpress.org/?v=6.8.1 By: Kris Spencer https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-54554 Wed, 30 Apr 2025 06:26:41 +0000 https://makeitagarden.com/?p=7489#comment-54554 In reply to Chris Young.

Sadly, many tutorials show E-6000. Mainly b/c it dries clear and isn’t as noticeable. Most do not do the research and only care about shooting out another You Tube or blog post to benefit their website or You Tube Channel. I discovered early on the discussions makers were having b/c their crafts were coming apart. There’s a huge difference between a “glue” and a caulk. E-6000 is a good craft glue for an INDOOR project. It’s just not intended to hold up to high temperatures. I have since researched the heat-rating for several products in order to help readers have success with their outdoor garden art b/c I hate to see someone give up out of frustration. 🙂

]]>
By: Chris Young https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-54538 Tue, 29 Apr 2025 10:55:31 +0000 https://makeitagarden.com/?p=7489#comment-54538 The best information I have found to date, I have made two glass mushrooms using E6000, both came apart in the sun, I was very disappointed, some glues are quite expensive so I haven’t tried again, thankyou for all this info. I look forward to starting from scratch.

]]>
By: Kris Spencer https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-54369 Tue, 22 Apr 2025 16:49:28 +0000 https://makeitagarden.com/?p=7489#comment-54369 In reply to Donna Hagen.

E-6000 is thin, runny and stringy. You have to either prop it tip end up when using it or put the cap back on. It you just set it on its side the product may continue to run out on its own. Other glues can do this as well. When I use E-6000, I always wipe the tip and prop it so the glue tip is in an upward position.

]]>
By: Donna Hagen https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-54318 Sat, 19 Apr 2025 19:04:52 +0000 https://makeitagarden.com/?p=7489#comment-54318 Has anyone had a problem with E-6000 running out of the tube after an application? Also trying to clean the tube to put the cap on? Lost a who!e tube just trying to stop it from coming out when I was doing dish flowers.

]]>
By: Kris Spencer https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-48963 Thu, 07 Nov 2024 17:39:16 +0000 https://makeitagarden.com/?p=7489#comment-48963 In reply to Lisa Weaver.

Not heard of B7000, but for outdoor use, you always want to look at temperature. All glues are rated for such. Super quick research on B7000 shows 90-C which equates to 194-F, so about 200. That is still a very low heat threshold (though better than E-6000). Some 2 part Epoxy’s are rated at 200. As mentioned in the article, it would depend on where you live and your summer temperatures. If you have prolonged heat, I’d stick with the silicone calk products. They are intended to caulk around the exterior of doors and windows. But you could certainly experiment and discover what works best for you.

As for the mosaic: are you mounting it on the door, or replacing existing glass with your mosaic panel? I do not have enough experience to confidently advise here. I would talk to a contractor or someone in your community that sells glass or works with glass arts. I have heard about those who have used thick glass platters for a transom or green house windows- that the glass is often thicker than the glass panes for standard windows. Many entry doors have glass panels in them that aren’t bothered by ‘vibrations’, so my guess is that if the panel was secure top and bottom and sides…so it’s not swinging loose, it’s probably going to be ok.

]]>
By: Kris Spencer https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-48962 Thu, 07 Nov 2024 17:20:30 +0000 https://makeitagarden.com/?p=7489#comment-48962 In reply to Loralee.

I love making garden art, and love being able to help others by sharing knowledge and experience. When I come up against a problem or something doesn’t work out, I attempt to find out why. I also keep an ear out for problems folks experience and in the process, I’ve learned quite a bit as well!

]]>
By: Lisa Weaver https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-48942 Wed, 06 Nov 2024 21:19:29 +0000 https://makeitagarden.com/?p=7489#comment-48942 Love this article…answered so many questions I had! I am just starting my “adventure” with recycled glass windows and yard totems. I was considering using B7000 as opposed to the E6000. Any thoughts on that? Although your article has me pretty much convinced to go the silicon route. Also, do you think a glass mosaic would work on a large entry door window…or would there be to much vibration from using the door?

]]>
By: Loralee https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-48678 Tue, 05 Nov 2024 06:25:35 +0000 https://makeitagarden.com/?p=7489#comment-48678 Thank you so much for this extremely clear and informative article. I have not yet made any garden art, but I hope to one day, and your info will make success much more likely for me.
I think I will try making some kind of winter/ holiday decoration first, so I won’t have to worry about the heat. (We rarely get temps below 30 degrees, so cold won’t be a problem either…)
Thanks again!
(Oh, and you are the first blogger I’ve seen who actually responds to every/ most of your comments! Thank you on behalf of everyone else for taking the time to do that!)

]]>
By: Kris Spencer https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-42383 Fri, 26 Apr 2024 01:59:09 +0000 https://makeitagarden.com/?p=7489#comment-42383 In reply to Keren.

Sounds like a great project. I love spools! But I’ve not worked with cement board before. I do know that crafters who do mosaic…even mosaic on glass or mirror surfaces or on wood use silicone. But it’s a different form of silicone. I think it’s clearer and thinner than the standard stuff in a tube. You might want to inquire at the hardware store. Perhaps checking at your local art glass store or a glass dealer? I’m thinking some type of silicone product for its excellent outdoor qualities.

]]>
By: Keren https://makeitagarden.com/weird-glue-failures-and-solutions-for-garden-art/#comment-42381 Thu, 25 Apr 2024 16:31:42 +0000 https://makeitagarden.com/?p=7489#comment-42381 Great article. Do you have any other articles (or recommendations ) for a wooden spool tabletop? I have been told not to contact the glass directly onto the wood but to add cement board to the wooden surface. Which glue / silicone would you recommend for this project. It will be heavy so table needs to stay outside in hot summer heat and freezing cold winter temperatures covered with snow.

]]>